Accessorized Products
| Product Name: Electric Dome Motors, 6/10 | |
| Part Number: ED6/10 | |
| Price (US $): 750.00 | |
| Product Description: Electric Dome Drive for the 6 or 10-foot domes, utilizing two 12vDC motor assemblies. The system is a “friction drive” with direct contact with the DSR underside. Includes two motor assemblies, all hardware, and electrical power wires (not shown). Can easily be added at any time. |
| Product Name: Electric Shutter Motor, 6/10 | |
| Part Number: ES6/10 | |
| Price (US $): 750.00 | |
| Product Description: Electric Shutter Drive for the 6 or 10-foot domes, utilizing a 12vDC motor assembly with windlass shafts and stainless steel cables for opening and closing the shutter. Includes a “sliding contact” system for power transfer, all pulleys and hardware, and electrical power wires (not shown). Can be added at any time. |
| Product Name: Power Supply 10 | |
| Part Number: PS2E | |
| Price (US $): 195.00 | |
| Product Description: A 15vDC 10A Power Supply with a built-in key switch and two toggle switches for the ED6/10 Electric Dome Drive and ES6/10 Electric Shutter Drive. Comes in either 110vAC or 220vAC input. Inquire about special international plug configurations. |
| Product Name: ED Motor Covers | |
| Part Number: EDC1 | |
| Price (US $): 75.00 | |
| Product Description: Safety covers for ED motor assemblies (all dome sizes). Made from matching fiberglass (same blue gel-coat as dome inside surface. Valuable in public installations to protect from fingers and hair getting caught in motor moving parts. |
| Product Name: Power Supply 15 | |
| Part Number: PS2E | |
| Price (US $): 195.00 | |
| Product Description: A 15vDC 10A Power Supply with a built-in key switch and two toggle switches for the ED15 Electric Dome Drive and ES15 Electric Shutter Drive. Comes in either 110vAC or 220vAC input. Inquire about special international plug configurations. (Note EU1-16 plug on the unit in photo) |
Dome Replacement Part Products
| Product Name: ED Wheels and Belts | |
| Part Number: EDW | |
| Price (US $): 19.00; 10.00 | |
| Product Description: The wheels and belts used on the ED Drive assemblies need to be replaced from time to time. They are very durable and wear is usually associated with operation problems. The “grooved” wheels are $19 each and the belts are $10 each. An instruction sheet is included. |
| Product Name: ES Pulley Upgrade | |
| Part Number: ESP | |
| Price (US $): 125.00 | |
| Product Description: In 2005 a new cable pulley system was developed for the ES6 and ES10 electric shutter. The reduction of friction and smoother operation made it a viable upgrade from the older “channel” setups. The kit is made up of single and double pulleys (5 for the ED6 and 7 for the ES10) and in most cases can use the existing holes from the channel clamps. |
| Product Name: ES Cables | |
| Part Number: ESC | |
| Price (US $): 50.00; 90.00 | |
| Product Description: The cable used in the ES6 and ES10 electric shutters is stainless steel and very durable. If the cable does need replacement we sell pairs for the ES6/10 ($50) and ES15 ($90.00). |
| Product Name: Wheels | |
| Part Number: RW1 | |
| Price (US $): 10.00 | |
| Product Description: The dome DSR rides/rotates on 3″ wheels. These wheels are made in Germany and have a very high-quality sealed bearing. The hard rubber material is very hard and durable. Replacements can be mounted through the splice plate or DSR swing out at the reverse flange access hole. |
| Product Name: Side Rollers | |
| Part Number: SR1 | |
| Price (US $): 3.00 | |
| Product Description: Side rollers prevent the DSR flange from coming in contact with the base wall as the dome rotates. The most common cause requiring replacement is when a side roller binds and no longer turns – resulting in a flat edge from wear. Replacements are mounted the same as wheels (see above). |
| Product Name: Wind Restraint System | |
| Part Number: WRS | |
| Price (US $): 95.00 | |
| Product Description: The current wind restraint was developed in 1999 and bumps the maximum wind speed well in excess of 110mph. The system is mounted on the outside of the dome basically holding down the top shutter with cables running through j-guides and down to the rear shutter catchers. When a dome sustains damage (for example a wind just with the shutter open), it is often best to replace the entire system. |
| Product Name: Soffit | |
| Part Number: SO1 | |
| Price (US $): 50.00; 60.00 | |
| Product Description: A rear soffit piece in matching fiberglass material is offered to close the rear gap where the curved base ring matches up with the straight edge of the rear shutter panel. These soffits come as standard features on the PD10 and PD15 domes and are offered as optional items on the HD10 ($50) and HD15 ($60). |
| Product Name: Glide Strips | |
| Part Number: GL1 | |
| Price (US $): 40.00; 80.00 | |
| Product Description: Glide strips are mounted on the inside surface of the front shutter section to reduce friction between the upper shutter and the dome shutter flange it “rides” upon. We sell replacement sets for 6/10 foot ($40) and 15-foot domes ($80). |
| Product Name: USB to Serial Adapter | |
| Part Number: USB | |
| Price (US $): 23.00 | |
| Product Description: Computer connections for both Digital Dome Works and RoboFocus are “serial” RS232. Most new computers have only USB ports. Fortunately, both of those systems work very well with both serials to USB adapters and hubs. We have a small single unit which is very easy to set up and has had no reported problems. |
Hours
Monday through Friday:
7:00 am to 4:00 pm.