RoboFocus Accessories

Accessories

Product Name: Remote Power Module  
Part Number: RFRP
Price (US $): 150.00
Product Description: The Remote Power Module is a convenient way for the user to control remotely up to four 120vAC (or 240vAC or 12vDC), outlets through the RoboFocus control program on the PC. Outlets can be connected to observatory accessories such as CCD cameras, heaters, dew zappers, video cameras, etc. Each outlet has its own pilot light. Removing source power to the module will reset all outlets to “OFF” while disconnecting from the control program software leaves each in its current state.

For our UK customers, we can now have a BS1363 version complete with plugs and sockets defined by that standard. There is an additional charge of $50 for this unit.

 

Product Name: Hand Paddle  
Part Number: RFHP
Price (US $): 30.00
Product Description: The RF3 Hand Paddle allows manual focusing via a small hand controller on a 12-foot cable. The “in/out” buttons move the stepper motor to achieve visual focus. These buttons are duplicates of the ones on the RoboFocus controller box.

 

Product Name: USB to Serial Adapter  
Part Number: RFUSB
Price (US $): 23.00
Product Description: Small single USB to serial adapter allows the connection of the RoboFocus control module to a PC USB port. Recognized as “plug-n-play” by Windows XP, the adapter is auto-configured and assigned COM port designation.

 

RF3 RoboFocus System Add-On

Product Name: Additional Motor Kit   

 

Part Number: RFAM1
Price (US $): 140.00
Product Description: You can elect to use your RoboFocus system on a second telescope by purchasing and installing an additional motor. The Additional Motor Kit comes with a stepper motor and mounting hardware, (brackets, shaft coupler, and/or timing sprockets and belts).

You must specify the telescope/focuser that the system will be installed on. In some cases, we may need to contact you for further information.

 

Product Name: RF3 Controller & Cables  
Part Number: RFC
Price (US $): 355.00
Product Description: The RoboFocus control module can be purchased separately for $330 as a backup unit or combined with an additional motor kit that was previously obtained.

 

RF3 RoboFocus System Add-On

Product Name: AP Bracket  
Part Number: RFB1
Price (US $): 35.00
Product Description: Custom bracket for Astro Physics focusers. This bracket is designed for both the 2-inch and 4-inch focusers. It is made with 0.125 aluminum with an attractive black powder coat finish. The bracket is very stable and designed for fast and easy RoboFocus motor mounting. 

 

Product Name: TAK Bracket (FSQ106)   

 

Part Number: RFB2
Price (US $): 35.00
Product Description: Custom bracket for Takahashi rack-and-pinion focusers. This bracket is designed for both the 2-inch and 4-inch focusers. It is made with 0.125 aluminum with an attractive black powder coat finish. The bracket is very stable and designed for fast and easy RoboFocus motor mounting. 

 

Product Name: TAK Bracket (FSQ106ED & Epsilon 180ED)   

 

Part Number:        RFB3
Price (US $):          35.00
Product Description: Custom bracket for Takahashi “new Q” and ED180 rack-and-pinion focusers. This bracket is designed for both the 2-inch and 4-inch focusers. It is made with 0.125 aluminum with an attractive black powder coat finish. The bracket is very stable and designed for fast and easy RoboFocus motor mounting.

 

Product Name:    JMI DX1/DX2 Bracket   

 

Part Number:        RFB4
Price (US $):          35.00
Product Description: Custom bracket for JMI DX1 and DX2 focusers. The bracket is made with 0.125 aluminum with an attractive black powder coat finish.  The bracket is very stable and designed for fast and easy RoboFocus motor mounting. 

Note: Two holes must be drilled in the focuser housing base. I will drill and mount the bracket at no charge if desired.

 

Product Name:     LX200 8″ GPS   

 

Part Number:        RFB5
Price (US $):          35.00
Product Description: Custom bracket for the LX200 8″ GPS. With the mirror lock knob and handle on the smaller rear plane of this scope, there is no surface room available for traditional SCT mounting. This bracket raises the motor assembly up and over the handle, allowing the sprocket and belt to install on the top area of the focus knob.  

 

Location

Technical Innovations

1271 La Quinta Dr. #6 Orlando Fl, 32809

Contact

Need additional assistance? Please contact us:

domes@homedome.com

(407)-601-1975

Hours

Monday through Friday:

7:00 am to 4:00 pm.

Social